欧美VIVOdesHD

  • <optgroup id="sok66"><input id="sok66"></input></optgroup>
  • 14-section clamp carrier

    high value

    The QUICK 14- and 20-Section Clamp Carriers are our mid-size Standard edge-gluing machines. Still, they boast all of the deluxe features of our larger machines, including zinc-plated clamps, Pneumatic Clamp Tightener, Pneumatic Panel Flattener and Electric Motor Drive with fully Automatic Carrier Rotation Cycle.

    The 14-section Standard Clamp Carrier is capable of producing over 300 edge-glued panels per shift (3 panels per section x 14 sections x 8 hours). It is ideal for the mid-size cabinet or furniture shop.

    The 20-section Standard Clamp Carrier is capable of producing approximately 500 edge-glued panels per shift (3 panels per section x 20 sections x 8 hours). It is ideal for the larger cabinet or furniture shop.

    14- and 20-Section Standard Clamp Carriers are available in widths (maximum stock length capacities) of 8.5' (standard) or 10.5'. (For greater widths, please see our Heavy Duty Clamp Carriers.)

    To view a high-resolution photograph of an 8.5' wide, 14-Section Standard Clamp Carrier, please click on the image to the left.

    14-section clamp carrier frame

    heavy-duty clamp carrier frame

    sturdy frame

    Our 14- and 20-Section Standard Clamp Carriers have sturdy frames, with cast iron sprockets, 2" diameter main shafts and rectangular steel tubing legs.

    Standard frame width (maximum stock length capacity) is 8.5'. 10.5' width is also available.

    The 14-section frame can easily be expanded later, if desired, to 20 sections, by bolting on a frame expansion kit.

    To view high-resolution photographs of a 14-Section Standard Clamp Carrier frame, please click on the images to the left.

    heavy-duty clamps

    The 14- and 20-section Standard Clamp Carriers use our super-strong Standard clamps, with 4-3/4" wide by 2-1/2" high jaws. The clamps are made of corrosion-resistant zinc-plated steel, and feature full box-frame construction. The full-length screws are a beefy 3/4" inches in diameter.

    Standard clamp opening is 38"; other clamp lengths are available. For face gluing, Rocking Plates, which extend the heights of the front and rear clamp jaws, are available, if needed.

    To view high-resolution photographs of our Standard clamps, please click on the images to the left.

    pneumatic clamp tightener

    control box

    high-production accessories

    The QUICK 14- and 20-section Standard Clamp Carriers feature Pneumatic Clamp Tighteners, Pneumatic Panel Flatteners and Electric Motor Drives with Automatic Rotation Cycles.

    The Clamp Tightener is a super-fast, 3500 RPM unit. The two-handed design is much more confidence-inspiring than the ergonomically awkward swing-style clamp tighteners offered by other manufacturers. The unit is extraordinarily fast, too; easily five to ten times faster than competing units. This enables all rear jaw adjustment to be made by the Clamp Tightener alone, without the need for separate manual rear jaw adjustment.

    The Panel Flattener is an easy-to-use unit that slides easily from side to side on ball bearings. The Panel Flattener exerts up to 700 (adjustable via separate air pressure regulator, included) pounds of downward force, easily flattening panels as the clamps are tightened.

    The Electric Motor Drive on our 14- and 20-section Clamp Carriers features our exclusive Automatic Rotation Cycle. With the press of one button, the entire rotation sequence (reverse rotate, front rest out, forward rotate, front rest in, lay clamps perfectly on front rest every time) happens automatically. This is a huge improvement over competing machines, which typically don't even have air cylinders controlling the front rest, nor any electrical systems at all, let alone fully automatic rotation systems.

    To view high-resolution photographs of these accessories, please click on the images to the left.

    movie

    To view a movie of our 14-Section Standard Clamp Carrier in operation, please click on the image to the left.

    movie

    To view a movie of our Standard Clamp Tightener Speed Demo, please click on the image to the left.

    clamp carrier brochure

    To download a PDF version of our Standard Clamp Carriers flyer, please click on the image to the left. (Or, e-mail your mailing address to us, and we’ll mail a flyer to you.)

    You will need Adobe PDF Reader version 4 or newer to open this file. You can download the Adobe PDF Reader for free by clicking on the button below.

    get acrobat reader

    14-section clamp carrier manual installation/operation manual

    To download a PDF version of a QUICK Standard 14+-Section Clamp Carrier Installation/Operation manual, please visit our Manuals page by clicking on the image to the left.

    testimonials

    Be sure to check out our customers' testimonials!

    in stock in stock

    To see the machines that we currently have in stock, please click on the image to the left.

    Go Back to Standard Clamp Carriers Page

    QUICK | Products | Support | FAQ’s

    Clamp Racks | Clamp Carriers | Large-Panel Presses | Glue Applicators

    6-Section CC | 14-Section CC | 20-80-Section CC’s | Automatic CC | Competitive Advantages

    欧美VIVOdesHD
  • <optgroup id="sok66"><input id="sok66"></input></optgroup>